XIONGDA METAL
News Center
25
2024
-
01
What are the advantages and disadvantages of vacuum furnace heat treatment?
Author:
The advantages of vacuum furnace heat treatment include:
No oxidation and no decarburization: Vacuum heat treatment can reduce the oxidation and decarburization of the material, which helps to maintain the original structure and performance of the material.
Degassing: The heating process in a vacuum can help the gas inside the metal escape, thereby reducing the possible adverse effects of these gases on the surface of the material.
Degreasing effect: Through vacuum heating, the grease on the surface of the workpiece can be effectively removed, and the appearance and quality of the product can be improved.
No risk of hydrogen embrittlement: Vacuum heat treatment can prevent embrittlement of titanium and other refractory metal surfaces.
Heat treatment distortion is small: Due to the small temperature difference between the inside and outside of the workpiece during the vacuum heating process, the thermal stress is relatively small, so the deformation of the workpiece after heat treatment will be reduced, especially compared with salt bath quenching, the deformation is significantly reduced.
Energy saving and environmental protection: Vacuum heat treatment usually adopts energy-saving technology and environmental protection measures. Compared with the traditional salt bath heat treatment method, it is more environmentally friendly and has lower energy consumption.
Disadvantages of vacuum furnace heat treatment include:
Some alloying elements evaporate more: In vacuum, the evaporation of some alloying elements may increase, which may affect the effect of heat treatment.
Equipment investment and production cycle is long: the initial investment of vacuum heat treatment equipment is large, and the insulation time of the whole production cycle (relative to the salt bath furnace) is longer, which increases the cost and time investment.
Limited use: In a vacuum environment, some materials may not be suitable for use due to volatilization or decomposition, and there are also technical difficulties, which may cause the vacuum furnace to be limited in practical applications.
LATEST NEWS
2024-01-25
Precautions for powder metallurgy heat treatment
The core of heat treatment of powder metallurgy parts is temperature control. Due to the high porosity of powder metallurgy parts, deformation and cracking are easy to occur at high temperatures. Therefore, it is necessary to strictly control the heating temperature and holding time according to the heat treatment requirements of different materials to prevent thermal deformation and cracks of the parts.
2024-01-25
Method of heat treatment of stainless steel
The current industry is getting more and more developed and the requirements for the steel industry are becoming more and more strict. In order to better meet the requirements of the market, large-diameter stainless steel pipes are heat-treated. The performance of large-diameter stainless steel pipes also increases the service life of large-diameter stainless steel pipes. The toughness of large-diameter stainless steel pipes is improved through heat treatment to increase the plasticity of large-diameter stainless steel pipes.
2024-01-25
Principle and precautions of ultra-deep cooling treatment
The principle of ultra-cryogenic treatment is to improve the performance of metal materials by changing their crystal structure. The cryogenic treatment temperature is very low, which can make the metal atoms move freely, thus changing the crystal structure and enhancing the hardness and toughness of the material.
2024-01-25
The function and effect of bright heat treatment
Bright heat treatment is a metal processing process, through heating and cooling and other different process treatment methods, so that the metal surface to generate a layer of dense oxide film, so as to improve the hardness of the metal surface, corrosion resistance, adhesion and wear resistance and other properties.